Basic Facts

Analog vs Digital Load Cells: A Beginner’s Guide

A load cell is a device that converts one form of energy into the other, and is primarily used to generate an electrical signal whose magnitude is directly related to the amount of force being measured. Simply put, load cells are one of the simplest and most accurate tools for measuring force.

Many industries utilize load cells for high precision weight management because they offer non-intrusive, highly accurate load measurement data. Properly installed load cells can easily achieve measurements as accurate as 0.03 to 1%, and custom load cells can be designed for virtually any application.

There are two primary forms of load cells, analog and digital. Here is a simple breakdown of both.

Analog load cells

The most popular form of load cell is an analog cell that measures stress and weight strain. These strain gauging sensors are attached to the spring element of the load, and this will bend when weight is placed upon it. The strain gauge then causes resistors to stretch, and their resistance is changed. This resistance is then converted into voltage, which is sent via wire to the scale to give an accurate, real-time measurement to the engineer.

Digital load cells
In simple terms, the difference between analog and digital load cells is how their signal is processed. They differ in three major ways:

  1. Their signal strength. Strain gauge signals begin with analog electrical voltages, but in this type of cell they are automatically converted to digital signals. In general, these signals use between two to six volts of energy, meaning the digital signal is quite stronger than analog.
  1. Signal content. A digital load cell transmits data from each load cell, compared to analog systems that use only one cell’s electrical voltage. This information uses a binary language, similar to computers, and because this binary information is safe from interference from radio signals, electromagnetism, and temperature, it is much more stable than analog.
  1. Data sample rate. This measures how fast a cell can read its information. Instead of analog cells providing information continuously in real time, digital load cells take bits of information at a time, multiple times per second.

This means that digital load cells can accurately record hundreds of measurements, from hundreds of individual load cells, in mere seconds. When custom load cells are needed for complex applications, digital is usually the first choice.

Underwater Load Cells | Submersible Force Sensors
Force and Torque Measurement Products

Precision Measurement Products

We serve all industries where force and torque measurement products are required. Our products include all of the standard load cells and torque sensors available from beam, “S” type and single point load cells to reaction and rotating torque sensors. Our products have gone where no others have gone before.
load cells

Load Cells

Sensing Systems offers custom solutions for all force measurement applications. We manufacture load cells in all capacities and configurations, from standard off-the-shelf to fully custom designs.
torque sensors

Torque Sensors

Complete solutions for all torque transducer measurement applications. We offer “Custom Off the Shelf” units by matching the required application to our existing designs.

force torque strain gage sensor calibration equipment

Calibration Equipment

Sensing Systems offers a variety of standard and custom kits for any force or torque calibration needs, enabling companies to in-source their calibration needs.
instrumentation and electonics strain gage torque force sensors

Instrumentation & Electronics

All our sensors may be interfaced with electronic equipment to display, monitor, log, and analyze the desired measurements.

Basic Fundamental Facts